Der Markt; alle Pre-War fahrzeuge zu verkaufen

This Marshall Supercharger was mounted on a Amilcar CGS Engine. 

Small boot handle with lock for small English car, in very good condition, does not need re-chroming, Length handle 9cms. Length shaft 7cms. Price includes postage worldwide.

Amilcar parts for CGS/CGSS Bracket for brake- and clutchpedals. Mentioned partnumbers: 30297, 30287 and CG325 with 1 shaft on which 2 attachments: 1 for the brakepedal  and 1 for the clutchpedal  Separate pedal. Partnumber: xx327 Requires work but quite rapairable.  € 65 exclusive transport  

A New (but 'old stock') leather bonnet strap suitable for a medium-sized (or perhaps large!) Vintage car.It measures 68" overall using the first punched hole and is 1.5" in width.

A carrier and housing for the rear main crankshaft bearing for an Amilcar G-Type engine. This came from a CGS engine and is also suitable for a CGSs.The parts are in generally good condition, though the bearing housing does have one broken lug, which is a reasonably easy thing to repair. The bearing carrier will naturally require re-metalling and s..

Replica Bugatti Type 35 aluminium bonnet and side panels

AMILCAR AXLE BEAM 52CMS BETWEEN SPRING PAD  CENTERS, THESE HAVE OFTEN BEEN USED ON BRESCIAS, COMES WITH WELDED DONOR AXLE FOR BRAKES AND PARTS. CAN BE DELIVERED TO VRM MONTLHERY.

bonnet for veteran

Bonnet for 12hp Vauxhall- 1938-1940. Needs a bit of work.

Amilcar M2 original balk head selling from Japan. I can send to over sea.