Der Markt; alle Pre-War fahrzeuge zu verkaufen

Part in good and original conditions, 

An Amilcar G-type, also CGS and CGS3 and perhaps other models, rear main bearing housing together with its rear main bearing. In general the housing is in excellent condition and does not appear to have any serious damage that is often caused by incorrect removal proceedure. As can be seen there is one damaged mounting lug on the housing. It sho..

An original early Smiths water temp gauge. It has a bezel diameter 2.25 inches and would fit a dashboard hole of 2 inches.  Gauge is in excellent cosmetic condition but is missing the sender bulb so will require refurbishment. Chrome bezel very good as is the black dial.  Buyer pays shipping costs.

An original Eureka pressure gauge, graduated to 10 psi so would suit low oil or fuel air pressure.  It has bezel diameter of 2 5/8 inches and would fit a dashboard hole of about 2 3/8 inches. Has bevelled glass, not tested.  Buyer pays shipping cost.

A new 'Dog-Bone' pattern radiator cap to fit a Sports Amilcar. It is 'old stock' having been in storage for more than 10 years, though the  exact date of manufacture and the  actual manufacturer are unknown. As can be seen from the photos it has a knurled finish to the rim of the 'cap' and to the ends of the 'dog-bones'. It appears to have a very g..

Smiths Bezel Switch for Vintage Bentley.  Off, side, head and all on settings.  Appears complete and in good condition but is not tested.  Postage at cost.

pair of ducellier  headlamps for amilcar etc    .no major damage apart from broken glass and dents in rims . all there. email if you need more info.

1 very nice Jaeger car clock  , 8 days clockworkRuns onlyfor a while so needs a bit cleening

* SOLD * Vintage Amilcar dashboard switch carrier.  Came from a CGS. Please see my other ad on the vintage Magneti Marelli switches which were mounted together with this plate. Comes together with  the old red mounting plate wich was also on an Amilcar. ASKING PRICE OR OFFER  for the switch carriers and the Marelli switches.

A very nice original Motor Aneroid with twist bezel to adjust the altitude. It is in superb condition cosmetically with the original bevelled edge glass. It appears to work as the needle moves when the instrument is lightly pressurised in a plastic bag. The dial measures 70mm in diameter and the mounting plate measures 85mm in diameter. I accept Pa..