Der Markt; alle Pre-War fahrzeuge zu verkaufen

1920s/30s   Klaxon 12V  Horn ..been shed stored  many years  but in working condition ..it has an old dent in the cone which should be easy torectify  +  needs paint  ..complete with original fixing bracket    ...will post anywhere at cost   

This is an original 12 volt CAV running board mounted horn, Condition is generally good - some light indentations and overall tarnishing and plating loss. Length 17.5 inches. Distance between mounting brackets 8.5 inches.

A Gabriel large three-pipe exhaust whistle. This is about 40"total length, 7 1/2" tall and the tubes are 1 3/4 " in diameter.  It has original nickel plated over the brass. It has the original Gabriel tag which is nice and crisp.  This appears to be all original, never touched and there are no dents or damage. It has the original "L" shaped connect..

This large Rubes 3/4 twist horn is about 10" tall and is about 6" wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40" long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is obviously squished. ..

A large and early triple horn that is 11" tall and about 6" wide. It is made by SMA Le Cyrano, Paris. It is in excellent condition and an older restoration. It was clear coated years ago. This is a great brass horn that would date from about 1905 to 1911ish. It could be used for an important American or European automobile. The price is 250.00 USD...

The Fulton Co. Four Chime Aermore Exhaust Horn / Whistle Four chime automobile exhaust horn with the tallest chime measuring 21 1/2" tall and a 1 3/8" inlet. The top is stamped "The Fulton Co. No. 00 Aermore Exhaust Horn". Very good, original condition. The price is 195.00 USD plus shipping. Please call at 734-730-4274 or email directly at: motorin..

Aermore No. 0 four tube whistle with a Fulton cutout. The cutout has the two-butterfly valve. The inlets have been modified from approximately from 2 3/4 ID to a 2 1/2" threaded inlet with a 1 3/4" ID inlet adapter. The valve needs to be soaked to loosen. The whistle is in very good original condition with nickel plating over brass. Overall length ..

2 model A Ford – Sparton 6 volt 1 Klaxonet 12 volt1 Handklaxon.All worksEur 150 each + shipping

Klaxon horn in good, working condition. Total lenght 24 cm. New made bracket. Very good "aoogha" sound.

This horn measures about 10" long and about 5" in diameter. It is made by the Maxim Automobile Supply Mfg. Company in Brooklyn, New York. It has a brass bell, a three-hole mounting bracket and the original bakelite wire knobs. I would assume it would be from about 1913 to 1919ish. A good looking horn and in good condition. The price is 110.00 US..