Der Markt; alle Pre-War fahrzeuge zu verkaufen

Oil pressure gauge for Morris Bullnose made by Eureka Ltd. Glass missing. Reads up to 10 lbs. Location: OS 28 Box 2

Large vacuum fuel pump gauge made by Besco in good condition. Hose needs replacing.

Three 6 stud wire-spoked wheels for ca 1937 Morris Eights in average to good condition. Update: One wheel has sold. Price is for the two remaining wheels. Internal reference: OWS WR15

Pair of rear guards for a circa 1937 Morris Eight Saloon. Fairly good condition, not rusty only light panelwork required. Location: PS1 7A

Bonnet for a circa 1937 Morris Eight. Good condition, only some minor bruises. Location: PS1 8A

Pair of front doors for a circa 1937 Morris Eight Saloon. Good honest condition, only relatively minor welding in bottom corners required. Location: PS 1 2A

Front axle for ca. 1937 Morris Eight. In serviceable condition but brakes incomplete. (backing-plates only). Stamped number 73668, also 192. 530mm axle pads centres 669mm spring eye centres 973mm king pin approx. measured at top Location: AS 5

Temperature gauge of unknown make showing in degrees - Fahrenheit. 100 to 220. Good condition. Diameter housing 5cms, diameter outer rim 6cms. Needs a bit of a polish up.

Distometer combined oil-, fuel- and amperage-gauge together with temperature gauge in Fahrenheit in centre. Fluid needs topping up. Looks in good condition. Who knows what cars these were used in? Diameter housing 13cms, outer rim 13 ½ cms. Needs polishing up.

Set of new-old-stock king-pins and bushes for a Morris-Ten. Including two extra brass bushes, 1 ¼ inch long. These will not fit on Morris-Eight. pin diameter: 19mm / 99.2mm long brash bush OD: 22.85mm / 32mm long steel bush (brass lined): 22.85mm / 25mm long Location: UT HG 6B