Der Markt; alle Pre-War fahrzeuge zu verkaufen

Aluminium centre,  Walnut rim, a really beautiful old wheel, probably 1900-1915 and probably French.350mm diameter overall,  rim 30mm x 27mm,  dished by 50mm .  Central hole 25mm .Very good condition  the wood has been  taken off, cleaned,  woodworm eradicated and then the wood replaced using epoxy glue and new dowels inserted from the un..

Vintage 1930/31 Austin 7 Seven coil engine. Suit Chummy or Ulster rep. Sold for rebuild but the correct age and type if you are building an Ulster replica.

steering wheel for cyclecars. diam 42cm a bit twisted 280 euro

Made on a 2mm Stainless Steel armature the rim is composed of 32 octagonal pieces of Indian rosewood, the two inner layers of eight pieces each are secret dowelled thro the S/S, then the two outer layers cover the dowels. All are epoxy glued so the wheel is very strong.Indian Rosewood is on the CITES list so normally cannot be used but this wood..

steering wheel   for  Delage Delahaye Talbot Lago Hotchkiss Salmson...needs restoration

Quillery steering wheel.  42cm diameter. for restoration

steering wheel. diam 45cm  nice unrestored condition (not perfect)

steering wheel. diam 45cm  nice unrestored condition (not perfect)

Really good early steering wheel. Probably French as it came from there  recently and is of French Walnut I believe.355mm diameter (c.14") on a three spoke aluminium armature with a tapered central hole  30mm -25mm.  Dished 50mm. The walnut was all detached when it arrived and has all been cleaned of old glue and the woodworm annihilated ..

Dynamo / Lichtmaschine für Austin Seven 1929 - 30 Lucas Typ 35A.