These are a pair of Left & Right Rudge-Whitworth splined hubs and finned brake drums. The left and right hubcaps are still fitted, one cap has a hole drilled in it, but it's otherwise good. The fins have a couple of chip and nicks but are otherwise OK.The finned internal brake drum at 258mm in internal diameterI can send more photos on request,..
Looking for identification of the front end.
Its large, cable operated brakes, 14" dia, look like French RAF splined hubs.
Guessing mid 20's
Has been trailered, but is complete.
Wheels have been re-rimmed.
Its available once identified.
Sensible offers, front end is located in Australia
An Amilcar G-type, also CGS and CGS3 and perhaps other models, rear main bearing housing together with its rear main bearing. In general the housing is in excellent condition and does not appear to have any serious damage that is often caused by incorrect removal proceedure.
As can be seen there is one damaged mounting lug on the housing. It sho..
A new 'Dog-Bone' pattern radiator cap to fit a Sports Amilcar. It is 'old stock' having been in storage for more than 10 years, though the exact date of manufacture and the actual manufacturer are unknown. As can be seen from the photos it has a knurled finish to the rim of the 'cap' and to the ends of the 'dog-bones'. It appears to have a very g..
Front axle with stub axles and king pins for Bugatti Brescia/T22/T23.The axle is a high quality reproduction thought to be from the Bugatti Owners Club made many years ago. It has been removed from a car to fit an original axle. King pin eyes are very good.The stub axles are for front brakes and are original, probably good for pattern only.Can be s..